Pressure pump for a JoJo tank: 0.75 kW, 0.37 kW or solar?

Updated 19 November 2026 · Independent guide by Home Water Backup

The right pressure pump for a JoJo tank in most family homes is a 0.75 kW booster pump with a pressure controller. A 0.37 kW pump suits a small home where only one or two taps run at once. The kilowatt figure alone does not tell you what a pump delivers, so check the flow and pressure on the datasheet, as shown below.

What the kilowatt ratings actually deliver

These figures come from the manufacturers’ own datasheets. “Best range” is where the maker says the pump works efficiently.

Pump Maximum flow Maximum pressure Best working range
JoJo 0.37 kW Basic (QB60 G) 23 l/min 3 bar 5 to 15 l/min at 1 to 2.3 bar
JoJo 0.37 kW Peripheral (QB60) 34 l/min 3.8 bar 10 to 20 l/min at 1 to 2.4 bar
JoJo 0.55 kW centrifugal (CPM146) 100 l/min 2.6 bar not stated
JoJo 0.75 kW centrifugal (CPM158) 100 l/min 3.2 bar 40 to 80 l/min at 1.9 to 2.8 bar
JoJo 0.75 kW variable speed (VSD) 66 l/min 4.5 bar 13 to 40 l/min at 2 to 3.5 bar
Pedrollo PKm 80 (0.75 kW) 50 l/min at 22 m head 70 m head at zero flow 40 l/min at 31 m head

Two things to notice:

  • Maximum flow and maximum pressure never happen together. A pump gives its highest flow at low pressure and its highest pressure at almost no flow. Look at the working range.
  • Two pumps with the same kilowatts can behave very differently. The two 0.37 kW pumps above are not the same, and nor are the three 0.75 kW pumps.

Ten metres of head is roughly one bar of pressure.

Which size for your home?

  • 0.37 kW: a flat, cottage or small house, single storey, one bathroom.
  • 0.55 to 0.75 kW: a family home with two bathrooms, where a shower, a tap and an appliance may run together.
  • 1.1 kW and up: double-storey homes with several bathrooms, or long pipe runs. Ask an installer to size it.

A pump that is too big for the job switches on and off rapidly and wears out sooner. An installer can match the pump to your pipes and fittings.

Published price ranges

  • 0.37 kW booster pump systemR1 700 to R8 500Published by AfriPumps, seller's range as of April 2026 · we read it on 19 November 2026 ·source
  • 0.75 kW booster pump systemR2 600 to R21 500Published by AfriPumps, seller's range as of April 2026 · we read it on 19 November 2026 ·source
  • 1.1 kW booster pump systemR3 700 to R35 500Published by AfriPumps, seller's range as of April 2026 · we read it on 19 November 2026 ·source

These are figures published by the companies and publications named, not our own prices or quotes. Check what each includes before comparing.

The controller matters as much as the pump

  • Pressure controller. Senses the drop in pressure when you open a tap and starts the pump. JoJo’s guide describes it as the part that starts pump operation, “pumping water from tank to house”.
  • Dry-run protection. Switches the pump off when the tank is empty. JoJo lists it as a built-in feature on its pumps. One pump supplier notes that a smart controller with this protection costs more but “saves you from buying a whole new pump later”.
  • Variable speed (VSD). The pump changes speed to hold steady pressure. Quieter and smoother, and it costs more.

Solar booster pump for a JoJo tank

There are two routes:

  1. A DC solar pressure pump that runs from its own solar panels. One South African retailer lists surface-mounted DC pumps of 210 W (33 litres a minute) and 450 W (58 litres a minute). The listing does not give pressure figures, so ask for them before buying.
  2. An ordinary pump on a solar or inverter system. RotoTank’s manual says that if you have solar, or plan to install it, you need a variable-speed or similar pump that is compatible with solar energy, because a standard pump’s start-up surge can trip an inverter.

A pump connected only to panels works in daylight. For water at night or in bad weather you need a battery.

When the power is off

An electric pump stops in a power cut. Your options are backup power for the pump, or a tank on a tall stand. JoJo notes that gravity feed needs a stand at least 3 metres high and gives only about 0.3 bar, which is a trickle compared with normal pressure. A hand tap at the base of the tank is the simplest fallback.

Fitting the pump

  • Place the pump on a firm, dry base beside the tank, under a cover.
  • Use a flexible hose between tank and pump. RotoTank’s manual tells plumbers to do this to absorb vibration.
  • JoJo’s guide calls for pipe of at least 25 mm from tank to pump.
  • The plug point must be weatherproof and installed by an electrician.

See how to connect a JoJo tank to your house for the full layout.

Common questions

Is a 0.75 kW pump big enough for a house?

For most homes, yes. JoJo's 0.75 kW centrifugal pump, for example, is rated at up to 100 litres a minute and 3.2 bar, with a best working range of 40 to 80 litres a minute. That is enough for several taps at once.

Is a 0.37 kW pump enough?

For a small home where one or two taps run at a time, it can be. JoJo's two 0.37 kW pumps work best at 5 to 15 and 10 to 20 litres a minute. A shower plus a washing machine filling at the same time may be more than that.

Can a solar pump run from a JoJo tank?

Yes. There are DC booster pumps that run directly from solar panels, and ordinary pumps that are suitable for running from a solar inverter. A pump running only on panels works while the sun shines unless it has a battery.

What is dry-run protection?

A safety feature that switches the pump off when there is no water, for example when the tank is empty. Running dry can destroy a pump, so it is worth having.

Sources

  1. JoJo, Centrifugal pump range manual (November 2025)
  2. JoJo, QB60 pump manual (November 2025)
  3. JoJo, 0.37 kW booster pump manual (November 2025)
  4. JoJo, 0.75 kW VSD booster pump sell sheet (March 2025)
  5. Pedrollo, PK series datasheet
  6. AfriPumps, A guide to booster pumps for homes and small businesses
  7. Bundu Power, Solar pressure pumps
  8. RotoTank, Water tank installation manual (2025)
  9. JoJo, Frequently asked questions